WHAT IF…
OUT Indicator is displayed…
The OUT indicator reminds you that your
system is in vacation mode. This
function
automatically adjusts the temperature
and humidity settings to levels
appropriate for when you’re away.
Press the VACATION button to resume
normal system operation.
NOTE: This indicator does not reflect a
problem with your system.
EQUIPMENT ON Indicator is displayed…
When the cooling equipment is operating,
the word COOL preceded by a small
triangle is displayed below the cooling set
point. When the heating equipment is
operating, the word HEAT preceded by a
small triangle is displayed below the
heating set point. If the equipment turn on
is being delayed, the triangle and the word
will flash.
NOTE: This indicator does not reflect a
problem with your system.
22
To Next Page
Loading...
