16
System wiring diagrams covered are:
d Conventional heating and cooling systems
d Heat pumps (air or geothermal)
d Boilers or radiant heat systems
d Accessory devices: dehumidifiers, humidifiers, or ventilators
Attach thermostat
Push any excess wires back into the wall, and connect the thermostat
to the backplate.
Step 5. Power On the HVAC System
Power back on the HVAC equipment. The thermostat will
automatically power on. It is recommended to have the homeowner’s
Wi--Fi password handy in order to complete setup.
Follow the on--screen instructions. The thermostat software will guide
you through the setup, which includes:
d Equipment configuration (HVAC and accessories)
d Setting preferences
d ConnectingtoWi--Fi
d Registering the thermostat to the online web portal
NOTE: The settings can be changed at any time from the menus.
Congratulations, you’re done!
To Next Page
Loading...
