106 | P a g e
Dehumidification with an Accessory Dehumidifier
When using an accessory dehumidifier, only the Cool to Dehumidify feature is available
from the equipment.
If you do not engage the Cool to Dehumidify feature, only the fan and the dehumidifier
will engage if there is a call for humidity removal without a call for cooling.
The equipment may need to be set to dehumidify with the fan. To select this option,
press and hold the Service button until the screen changes (~10 sec), press Equipment
setup, then dehumidifier, then set dehum with fan to Yes. Finally Save
To Next Page
Loading...
