Carrier ZS Pro-F - Outside Air Icon

Icons and text indicators
ZS Sensor CARRIER CORPORATION ©2020
Applications Guide All rights reserved
16
This item...
Indicates...
Notes
CO2
The value shown is CO
2
. Shown for a CO
2
Rnet tag.
UOC
The value shown is VOC. Shown for a VOC Rnet tag.
EFF
The value shown is the effective setpoint. Automatically generated by the BACnet
Setpoint microblock.
EI
Environmental Index Shown for EI Rnet tag.
TIPS
• Rnet Tag numbers seen on a sensor are not intuitive. We recommend that you use the display text to clearly
identify a value.
NOTE
The following letters do not display on a sensor screen: K, M, Q, V, W, X
• We recommend that you limit the information displayed on the Home screen. Use the Information screen or
Diagnostic screen to display any values that require display text to describe them.
Outside air icon
To display this icon with the outside air temperature, humidity, or CO
2
:
1 From the
Sys Out
microblock menu, add a
BACnet Analog Value Status
microblock.
2 On the Property Editor's
Rnet
tab, check
Enable Rnet
.
3 Select an Outside Air option from the
Rnet Tag
drop-down list.
4 Check a
Show on
screen to display the value and icon.
NOTE
In addition to :
○ Temperature shows or .
○ Humidity shows .
○ CO
2
shows
CO2.