Carrier ZS Pro-F - Maintenance Icon

To Next Page

To Previous Page

Icons and text indicators

4 Under

Show when active as

, check

Alarm

to display on the Home screen and any other selected screen.

5 Optional: To display details about the active alarm, check a

Show on

screen to display the

Active Text

and

Rnet tag.

NOTE

When active, alarm information will automatically display first on the assigned screen, regardless of

the display order you define.

In the example below, the Rnet tag for

High Zone Temp Alarm (1025)

is set to show on the

Information screen

Because

Alarm

is checked, will display on the Home screen. When the user presses the button, the

Information screen will show the icon, the Rnet Tag

1025

, and the Active Text

Hi Zone

Maintenance icon

The

indicates a maintenance condition versus an alarm condition.

1 From the

Sys Out

microblock menu, add a

BACnet Binary Value Status

microblock.

2 On the Property Editor's

Rnet

tab, check

Enable Rnet

3 Select a pre-defined maintenance condition (1XXX) from the

Rnet Tag

drop-down list.

Other manuals for Carrier ZS Pro-F