Carrier ZS Pro-F - Fan Status and Control

Programming specific applications
ZS Sensor CARRIER CORPORATION ©2020
Applications Guide All rights reserved
21
Fan status and control
A ZS Pro or ZS Pro-F sensor can:
• Show fan status (
when on)
• Show fan speed ( Low, Medium, High)
• Let the user manually control fan speed
To show on the Home screen when the fan is on
1 From the
Sys Out
microblock menu, add a
BACnet Binary Value Status
microblock.
2 On the Property Editor's
Rnet
tab, check
Enable Rnet
.
3 Select
Fan Status (100)
from the
Rnet Tag
drop-down list to display on the Home screen.
4 Do not check a
Show on
screen. displays on the Home screen when active.
To show fan speed on the Home screen
1 From the
Sys Out
microblock menu, add a
BACnet Multi-State Value Status
microblock.
2 On the Property Editor's
Rnet
tab, check
Enable Rnet
.
3 Select
Fan Speed Status (500)
from the
Rnet Tag
drop-down list to show the fan speed (Low),
(Medium),
(High) on the Home screen.
4 Do not check a
Show on
screen. The appropriate fan speed icon displays on the Home screen based on the
microblock's value.