Carrier ZS Pro-F - Appendix A: Rnet Tags

Appendix A: Rnet tags
ZS Sensor CARRIER CORPORATION ©2020
Applications Guide All rights reserved
32
Rnet tags are numbers that identify types of system values, and determine how a ZS sensor will display the value.
• Some Rnet tags display an icon that indicates the type of information. For example, Rnet tag 100 indicates
Fan Status. The sensor will display a fan icon when the microblock is active.
• Rnet tags that do not display an icon will display the actual Rnet tag number in the lower left corner of the
sensor's display. For example, Rnet tag 416 indicates Air Flow Setpoint.
See the table below to find out the type of value an Rnet tag number represents.
Rnet tag number...
Indicates this type of value...
And displays...
001
Zone Temp
or
002
Zone Humidity
003
Zone CO2
CO2
004
Zone VOC
UOC
100
Fan Status
101
Fan Command
The tag number
102
Cool Stage 1
The tag number
103
Cool Stage 2
The tag number
104
Cool Stage 3
The tag number
105
Cool Stage 4
The tag number
106
Heat Stage 1
The tag number
107
Heat Stage 2
The tag number
108
Heat Stage 3
The tag number
109
Heat Stage 4
The tag number
110
Hot Gas Bypass
The tag number
111
Reheat
The tag number
112
Reversing Valve
The tag number
113
Enthalpy Wheel Status
The tag number
114
Dehum Wheel Status
The tag number
115
Filter Status
116
Energy Save Mode
117
Occupied Status
The tag number
Appendix A: Rnet tags