Carrier ZS Pro-F - Adding Custom Rnet Tags

Appendix A: Rnet tags
ZS Sensor CARRIER CORPORATION ©2020
Applications Guide All rights reserved
36
Adding custom Rnet tags
You add custom Rnet tags in the Snap application. Select
Options
>
Preferences
>
Rnet Tags
tab. Do not
duplicate tag names or numbers.
After you create a custom tag number, it automatically appears on the
Rnet Tag
drop-down list for that point type.
If you open a control program with custom Rnet tags on a different machine than the one it was created on, the
custom tags automatically appear in the
Rnet Tag
drop-down list.
NOTE
To copy all custom Rnet tags to another computer, click
Export
, then save the file. On the other computer,
click
Import
, then select the exported file.