Carrier ZS Pro-F - Duct Air Temperature Sensor; DAT Sensor Specifications

Duct Air Temperature sensor
Carrier Sensors CARRIER CORPORATION ©2021
Installation Guide All rights reserved
34
Part #33ZCSENDAT
The Duct Air Temperature (DAT) sensor monitors supply air and is required for cooling and heating air source
applications on non-Carrier dampers and for stand-alone operation.
DAT sensor specifications
Operating range
-40° to 245°F (-40° to 118°C) with a nominal resistance of 10,000 ohms at 77°F
(25°C). See table below.
Sensor tolerance
Accuracy of ±0.36°F (0.2°C) from 0° to 70°C
Physical
Small, epoxy sensor, 1.25 inch (3.2 cm) long. Includes a mounting grommet and 75-
inch cable.
Thermistor Resistance vs. Temperature Values for Duct Temperature
Sensor
10K Type II (CP/MCI)
Temp (F)
Temp (C)
Resistance (Ohms)
-40
-31
-22
-13
-4
5
14
23
32
41
50
59
68
77
86
95
104
113
122
131
140
149
158
-40
-35
-30
-25
-20
-15
-10
-5
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
335,651
242,195
176,683
130,243
96,974
72,895
55,298
42,315
32,651
25,395
19.903
15,714
12,494
10,000
8,056
6,530
5,325
4,367
3,601
2,985
2,487
2,082
1,752
Duct Air Temperature sensor
Downloaded from ManualsNet.com search engine