Carrier ZS Standard - Page 38

Appendix A: Rnet tags
ZS Sensor CARRIER CORPORATION ©2020
Applications Guide All rights reserved
34
Rnet tag number...
Indicates this type of value...
And displays...
405
Unoccupied Cooling Setpoint
plus
UnOCC
406
Occupied Humidity Setpoint
The tag number
407
Unoccupied Humidity Setpoint
The tag number
408
Occupied CO2 Setpoint
The tag number
409
Unoccupied CO2 Setpoint
The tag number
410
Minimum OA Damper %
The tag number
411
Static Pressure Setpoint
The tag number
412
OA Temp Cooling Lockout
The tag number
413
OA Temp Heating Lockout
The tag number
414
Changeover Temp
The tag number
416
Air Flow Setpoint
The tag number
417
Occupied VOC Setpoint
The tag number
418
Unoccupied VOC Setpoint
The tag number
419
Supply Air Temp Setpoint
The tag number
420
Setpoint Adjust Limit
The tag number
421
Cooling Airflow Setpoint
The tag number
422
Heating Airflow Setpoint
The tag number
500
Fan Speed Status
, ,
, or
501
HVAC Zone Mode Status
and/or
600
Fan Speed Mode Request
, ,
, or
601
HVAC Zone Mode Request
and/or
800
Temperature units (°F/°C) displayed on sensor
The tag number
Rnet tag number...
Indicates this type of alarm...
And displays...
1024
Generic Alarm
or on the
Home screen, and
the tag number on
the Info screen
1025
High Zone Temp
"
1026
Low Zone Temp
"
1027
Filter Change Required
"
1028
High Discharge Air Temp
"
1029
Low Discharge Air Temp
"
1030
Supply Fan Failure
"
1031
Supply Fan in Hand
"
1032
Supply Fan Runtime Exceeded
"
1033
Exhaust Fan Failure
"
1034
Exhaust Fan in Hand
"
1035
Exhaust Fan Runtime Exceeded
"