Appendix C: Converting a control program with an RS Pro to a ZS Pro
ZS Sensor CARRIER CORPORATION ©2020
Applications Guide All rights reserved
38
Step 1: Update run conditions with ZS sensor microblocks
Before
Remove this microblock ...
1. RS Zone Sensor Sensor Binder and ASVI
2. Time Clock BACnet Time Clock with TLO and Override Status
3. Setpoint BACnet Setpoint
4.
BACnet Analog Value Status to expose Outside Air Temp to the
ZS sensor
See Microblock Reference Help for information on each of the above microblocks.
Appendix C: Converting a control program with an RS Pro to a ZS Pro
To Next Page
Loading...
