Need help?Do you have a question about the Carver Yachts 39 MOTOR series and is the answer not in the manual?
General| Brand | Carver Yachts |
|---|---|
| Model | 39 MOTOR series |
| Category | Boat |
| Language | English |
Outlines fundamental principles and practices for safe boat operation.
Provides key recommendations for safe boating practices and equipment.
Discusses how to handle challenging weather and sea conditions safely.
Details critical steps to take in various emergency situations onboard.
Lists and explains essential safety equipment required for boating.
Defines the owner's duties and knowledge required for responsible boat operation.
Alerts owners to the dangers of carbon monoxide and its prevention.
Emphasizes the importance of understanding and obeying warning labels on the boat.
Provides an overview of the boat's 12-volt DC electrical system.
Describes the boat's battery banks and their functions.
Explains how to use 12-volt equipment and its impact on battery discharge.
Details the operation of the boat's standard battery chargers.
Explains how 12-volt equipment is controlled via circuit breakers.
Describes the functions of the DC Control Center panel and its components.
Details the purpose and layout of the safety breaker panel.
Offers solutions for common problems with the 12-volt electrical system.
Provides a visual representation of the boat's DC electrical system wiring.
Describes the boat's 50 amp AC electrical system powered by shore or generator.
Explains the procedures for connecting to and using shore power.
Details how to use the optional generator for AC power.
Explains how AC equipment is controlled via circuit breakers.
Describes the AC Control Center panel, gauges, and breakers.
Explains the function and testing of GFCI receptacles for safety.
Discusses AC device loads and system capacity limits.
Explains the metallic bonding system for corrosion prevention and safety.
Provides solutions for common problems with the AC electrical system.
Visual diagram of the 110-volt AC electrical system wiring.
Explains the boat's fresh water system, including tanks and heater.
Describes the operation of the raw water washdown systems.
Explains the procedure for connecting to a shore water source.
Details the operation and components of the optional air conditioning system.
Explains the automatic bilge pumps and their locations.
Covers the boat's sanitation system, including toilets and waste tanks.
Details the operation and safety of the optional propane stove.
Provides instructions for checking the propane stove system for leaks.
Provides an overview of the boat's propulsion systems and engine types.
Explains the gasoline and diesel fuel systems and their components.
Details the engine room ventilation system designed to remove fuel vapors.
Explains how the engine's cooling system works and its maintenance.
Describes the components of the engine exhaust system and safety checks.
Details the automatic fire suppression system in the engine room.
Explains the function of the gauges on the helm instrument panel.
Describes the controls for engaging engines, speed, and direction.
Outlines steps to ensure the boat is ready for a safe cruise.
Provides detailed instructions and safety precautions for fueling the boat.
Guides on pre-start checks and starting the boat's engines.
Recommends professional assistance for launching the boat.
Emphasizes the importance of navigation and suggests resources for learning.
Covers essential procedures for controlling the boat competently.
Advises on secure and balanced loading of items onto the boat.
Explains techniques for safely maneuvering the boat when leaving or docking.
Details the proper method for anchoring the boat effectively.
Provides guidance on understanding and using mooring lines.
Covers the steps for safely departing a dock or mooring.
Recommends tasks to complete before the boat's first outing.
Explains how to achieve and operate the boat at planing speed.
Describes the function and use of electric/hydraulic trim tabs for boat attitude adjustment.
Provides guidelines for maintenance activities and their intervals.
A log to record maintenance activities performed on the boat.
Explains how to maintain the exterior fiberglass, gelcoat, and hardware.
Tips for cleaning and maintaining the boat's exterior fiberglass surfaces.
Information on applying and maintaining antifouling bottom paint.
Guidance on cleaning and protecting stainless steel components.
Details maintenance for engines, generator, and thru-hull fittings.
Instructions for maintaining the boat's engines and optional generator.
Discusses maintenance of the 12-volt DC electrical system, focusing on batteries.
Outlines procedures for flushing, sanitizing, and maintaining the fresh water system.
Explains how to maintain bilge pumps, strainers, and overall bilge cleanliness.
Covers ongoing maintenance for the sanitation system to prevent problems.
Explains the importance of winterizing the boat and its systems before storage.
Advises on safe and proper procedures for lifting the boat.
Details how to properly block the boat for dry storage to prevent damage.
Guides on winterizing various boat systems like engines, AC, and plumbing.
Instructions for winterizing the boat's engines.
Details on draining and winterizing the fresh water system.
Procedures for winterizing the raw water washdown system.
Instructions for winterizing the bilge area and pumps.
Covers winterizing procedures for the boat's sanitation system.
Recommends dry storage for maximum protection during storage.
Advises on protecting the boat during dry storage.
Checklist for preparing the boat for use after storage.
Details the terms of the Carver Limited Warranty and owner/dealer responsibilities.
Outlines the dealer's duties regarding warranty and service.
Specifies the owner's responsibilities for maintaining warranty coverage.
Explains the requirements for performing warranty work on the boat.
Explains the HIN and its significance.
Guidance on contacting Original Equipment Manufacturers for component information.
Lists the technical specifications of the boat model.
Illustrations showing the locations of various boat components.
Illustration showing the layout of the boat's cabin.
Diagram showing the location of interior hatches for system access.
Diagram showing the location of various deck plates.
Diagram showing the location of thru-hull fittings.
A list of manufactured components and their categories.
The full text of the Carver Limited Warranty.
To Next Page
