CARVIN
®
STARFALL | USER MANUAL
4
STEP 5
Remove the top ledge cover.
STEP 6
Unscrew the 4x top ledge screws. (2 on each side).
STEP 7
Remove the top ledge.
Store the top ledge in a safe place as we recommend to keep it for winterizing (See
WINTERIZING section at the end of this document).
STEP 8
Pass LED cable to the STARFALL hole.
STEP 9
Position the STARFALL on the top plate.
STEP 10
Connect electric connector to the Star Series cable.
To Next Page
Loading...