Need help?Do you have a question about the CAS 4040 and is the answer not in the manual?
Selects the disc input signal for RIAA equalisation processing.
Selects the tuner input for medium output tuners.
Selects a fourth signal source like CD, tape replay, or another tuner.
Allows simultaneous recording and monitoring from tape.
Combines left and right channels for monoral mode, reducing noise.
Attenuates signals by 22dB for answering calls or changing records.
Adjusts the output amplitude. Avoid exceeding maximum ratings.
Adjusts gain differentially between left and right channels.
Provides lift and cut for treble frequencies, with a high hinge point.
Provides lift and cut for bass frequencies, extending bass response.
Standard ¼" jack for low impedance headphones, disconnects speakers.
Mains ON/OFF switch and power status LED indicator.
Details the mains fuse holder and UK mains lead wiring instructions.
Connects loudspeakers via switched or unswitched terminals.
Provides earth return paths for left and right channel speaker outputs.
Dissipates heat; ensure proper ventilation to prevent overheating.
Connects to tape recorders for recording and playback.
Connects various audio sources like CD players, tuners, and turntables.
Terminal for earthing the turntable's pickup arm and chassis.
To Next Page
General