CAS CI-200 Series - NT-200 Command Mode Table

44
Note 1. NT-200 Command Mode Table
Command (ASCII Code) Description Status
HI High Limit Read / Write
LO Low Limit Read / Write
KT Key Tare Value Read / Write
CO Code Read / Write
WT Current Weight Read
ZE Operation with ZERO Key Read
TR Operation with TARE Key Read
GN Operation with Gross/Net Key Read
ID Device Number (ID) Change Read
HD Operation with HOLD Key Read
PR Operation with PRINT Key Read
TP Operation with Total Print Key Read
PW POWER OFF Read
Read
1 2 3 4 5
Device ID Command CR LF
Note 1. Device ID is hex value and Command is ASCII value.
[Ex] If Device ID is 13, a user wants to know the current weight value -> 0x0d
0x57 0x54 0x0d 0x0a
Write
1 2 3 4 5 6 7 8 9 10
Device ID Command DATA (Not include decimal point) CR LF
Format for Device ID Change
1 2 3 4 5 6
Device ID Command DATA CR LF
Note 2. When you change code and device number, the data value is HEX 1byte.