CAS CI-201A - 7. System Mode; 7-1. Entering System Mode

58
7. System Mode
7-1. How to Enter the System Mode
Step Display Screen and Key Input
Load
Tray
Descriptio
ns
1
Press key for about 3 seconds in the weighing
mode.
Empty
2
Screen display: “1. PCS” characters are blinking after
“SYSTEM” is displayed.
3
If key is pressed, “1. PCS” characters are blinking.
If key is pressed, “2. PER” characters are blinking.
If key is pressed, “3. WGT” characters are blinking.
Select the
mode to
which you
want to
move.
4
If key is pressed, the selected mode is set.