CAS CI-6000A Series - Measurement Mode; Timer - Start Delay Time of Finish Signal; Off Range of Finish Signal

31
F20
FUNCTION : Measurement Mode
DISPLAY DESCRIPTION
F20 0 Do not use.
F20 1 Normal batching
F20 2
Customer Programmed
Control mode
Loss-in-Weight batching
F20 3 Normal batching
Set value
( 0 ~ 4 )
F20 4
Built-in automatic
Program mode
Loss-in-Weight batching
F21
FUNCTION : Timer – Start Delay Time of Finish Signal
DISPLAY DESCRIPTION
F21 00 No delay time
F21 10 1.0 sec
Set value
( 00 ~ 99 )
F21 99 9.9 sec
Note 1. This function is used to decide the delay time of start- signal of output which the batching
operation is completed
F22
FUNCTION : Off Range of Finish Signal
DISPLAY DESCRIPTION
F22 00 Do not use
F22 01 Finish signal is off when the weight is within one division
Set value
( 00 ~ 99 )
F22 99
Finish signal is off when the weight is within ninety nine
division
Note 1. This function is used to decide the size of output signal which batching- operation is
completed.
Note 2. You have to set F19 to 00 if you want to use the F22 function.
If F19 & F22 are set any values at the same time, F22 is disregarded.
Because the priority of F19 is high