CAS CI-6000A Series - Key Test; Test Menu; How to Go to Test Mode

43
10. Test Mode
1) How to go to Test Mode
Open the front cover of indicator. set SW1 DIP3 on.
① : Select test menu that you wish to test.
② Please select test menu with arrow keys and press ENTER key.
③ : Test menu is selected. Proceed key test.
④ When test is done, Press ENTER key.
To finish test mode, set DIP3 off.
2) Test Menu (TEST 1 – TEST 8)
TEST 1 : Key test
TEST 2 : VFD display test
TEST 3 : A/D conversion test
TEST 4 : Serial interface test (COM1, COM2)
TEST 5 : Printer test (COM2)
TEST 6 : External input/output test
TEST 7 : Analog Out Test(Option)
TEST 8 : BCD Out Test(Option)
TEST 1
FUNCTION : Key test
KEY DISPLAY DESCRIPTION
ENTER: Go to menu
Selection mode
tESt 1 TEST 1 condition
Other keys : Perform test 1 1
Press any key to test then the display
shows its number and code.
Note 1. External input key test is TEST 6.
< Key list >
KEY NO. CODE KEY NO. CODE KEY NO. CODE
ZERO 1 1 TARE 2 2 K.T 3 3
G/N 4 4 * 5 5 ENTER 6 6