4
11. Weighing Mode
1) How to move
Turn POWER switch on, and you will go to the Weighing Mode.
2) Available keys
KEY DESCRIPTION
1. Used to remove small variations in the indicator’s zero.
1. Used to weigh an item by using the container.
2. Save tare weight and shows net weight.
1. Used to enter tare weight manually
2. If you press this key, “t 00000” is shown on the display.
3. Enter tare weight with arrow keys and save it by pressing the
ENTER key.
1. Toggles between gross weight and net weight
2. You can prohibit using of keyboard by pressing G/N key for 4 sec
to use keyboard again, press G/N key for 4 sec
1. “*” is used in various way.
2. Used to input the set-point value for batching operation
(Press * key for 2 seconds)
3. You can select this key’s function in SET mode F23.
0. Do not use.
1. PRINT Key.
2. HOLD Key.
1. ENTER key is used in various way.
2. You can select this key’s function in SET mode F24.
0. Do not use
1. TOTAL PRINT key.
2. START key for batching operation
3. STOP key for batching operation
3. Set set-point code for batching operation.(00~49)
(Press the ENTER key for 2 sec.)
To Next Page
Loading...
