CAS CI-6000A Series - Automatic Program Control Mode; Batching Operation; Set-Point Condition; User Program Control Mode

51
6) Set-point Condition
Output is done according to the following condition in batching operation.
MODE OUTPUT CONDITION
COMMON Zero band output GROSS weight ≤ Zero band
NORMAL
Optional preliminary
weight output
NET weight ≥ Final weight – Optional preliminary weight
Loss – in
Optional preliminary
weight output
GROSS weight > Optional preliminary weight
COMMON
Preliminary
weight output
NET weight ≥ Final weight - Preliminary weight
COMMON
Final weight
Output
NET weight ≥ Final weight - Free fall weight
COMMON
High limit weight
Output
NET weight > Final weight + High limit weight
COMMON
Low limit weight
Output
NET weight < Final weight - Low limit weight
7) Batching Operation
You can select batching operation method in set mode, F20.
a. USER PROGRAM CONTROL MODE
■ Normal Batching
■ Loss-in-Weight Batching
b. AUTOMATIC PROGRAM CONTROL MODE
■ Normal Batching
■ Loss-in-Weight Batching