3. Technical Specification
■ Analog Part & A/D Conversion
Load Cell Excitation Voltage 8 x 350Ω load cells
Zero Adjustment Range 0.05mV 20mV∼
Input Sensitivity 0.6μV/D
System Linearity
Within 0.01％ of FS.
A/D Internal Resolution 1 / 1,000,000
A/D External Resolution 5,000 dd, 10,000 dd (Max)
A/D Conversion Speed Maximum 200 times/sec
■ Digital Part
Span Calibration
Full Digital Calibration : SPAC™
(Single pass automatic span calibration)
Input Noise
Under
±0.3μVpp
Input Impedance Over 10M Ω
Display VFD (7 digit)
Size of letter 13mm (Height)
Minimum division x1, x2, x5, x10, x20, x50
Display below zero “ - ”
"ZERO" ▼ Current weight of “0” kg
"STABLE" ▼ Weight is stable
"GROSS" ▼ Gross weight is displayed
"NET" ▼ Net weight is displayed
"TARE" ▼ Tare function is activated
"HOLD" ▼ Hold function is activated
" * " ▼
" * " key is pressed (print key)
Automatic print is set.
To Next Page
Loading...
