Touch Screen Calibration
Category Key
24
Touch Screen Calibration
The touch screen calibration can be enabled using two different methods. First
method is to use Menu 1871. The second method is done using the Power Switch.
Method 1
1. Power the scale Off using the main power switch.
2. Power the scale On.
3. While the scale is counting down press and release the power switch three
times.
4. Follow the on screen instructions to calibrate the touch screen.
Method 2
1. Access Menu 1871.
2. Press the Page Down key.
3. Enter a “Y” at the Touch Calibration prompt.
4. Press the Enter key.
5. Follow the on screen instructions to calibrate the touch screen.
To Next Page
Loading...
