Network Setting
Menu 1916 WLAN Setting (DHCP Enabled)
32
Menu 1916 WLAN Setting
DHCP Enabled (Automatic IP Configuration)
Menu 1916 is used to program the Wireless LAN module information.
Note: You cannot access Menu 1916 WLAN Setting if Menu 1917 WLAN Use is
set to “N”.
1. Access Menu 1916.
2. With the cursor in the SSID field press the Tare Key. You should see a list
of near by SSID’s with their Security Types (if any) and a Signal Strength.
Locate the SSID that you want to connect to and press the SSID name.
This will automatically select that SSID and the Security Type and move
the cursor to the Security Key field.
To Next Page
Loading...
