Network Setting
Menu 1916 WLAN Setting (DHCP Enabled)
34
5. The scale will return to Menu 1910. Press the Sales Mode key.
6. You should see the main operator screen with “CONN” in the information
bar.
7. If Menu 1912 DHCP is set to a “Y” and the Wireless AP has DHCP enabled
the scale will automatically obtain an IP address and you will see a pop up
window with the scale’s IP address in it and “CONN” will change to “WLAN”.
Note: If Menu 1912 DHCP is set to a “N” then the scale’s IP configuration will
have to be done manually using Menu 1913.
To Next Page
Loading...
