103
g. Printing PLU code (Menu code 1570)
h. Printing all reports (Menu code 1580)
■ Select "YES" for all reports printed or "No" for only
closing without other reports when executing "close".
①(Using
key and go to option setting
mode from main menu. And then press )
to get into
PLU code printing mode.
② User may select YES or NO by pressing "1" or
"0" respectively. You can simply change the
Setting by pressing “1” or “0”.
①(Using key and go to option setting
mode from main menu. And then press )
to get into all report printing mode.
② User may select YES or NO by pressing "1" or
"0" respectively. You can simply change the
Setting by pressing “1” or “0”.
To Next Page
Loading...
