26
d. Self-test on printing
■ Printing self-test function may be also executed on test mode in
"II. Programming mode".
e. Zero function
■ The scale is not in initial zero point when any item(s) is(are) on the platter.
User may need to set zero using "zero" key.
① Press
while counting 0~9 after turning on
the scale by pressing
. Then, it automatically
prints out the test report.
① The scale is not in initial zero point.
② Set zero point. User can set zero only within
±2% of capacity. For example, the 6kg
CT100 model’s 2% capacity is ±120g.
To Next Page
Loading...
