34
4.7.2 Programming the Time (SET #2)
How to program the time
1) To go to PROGRAM mode, press the number 1 key then the MODE key.
2) Press key five times.
3) The WEIGHT display shows “SEt”.
4) Press the PRT/*key and the display shows “SEt EntEr 0”.
5) Press the number 2 key and then the PRT/* key.
6) The display shows “tiME EntEr”.
7) Now type in the time in HOURS/MINUTES/SECONDS format. For example, 3:28:00 PM would be
entered as follows: 152800. The display will show “SEt”.
8) If you wish to exit the PROGRAM mode, press the C key.
Input the SET No.
C
PRT/*
2
5
SET #2
PRT/*
8
0
0
1 2
HH.MM.SS (Hour.Minute.Second)
Current Time: 11:23:45
Ex) 15:28:00
To Next Page
Loading...
