63
5.2.4 Non-PLU
The Non-PLU sales report includes the total sales information for all Non-PLU transactions.
1) To go to the ACCOUNT mode, press the number 2 key and then the MODE key.
2) The display shows “ rPt”.º
3) Press the PRT/* key and the display shows “ rPt GrAnd”.º
5) Press the PRT/* key. The scale will issue a Report label with the sales totals of all non-PLU’s.
6) You can use the key or key to select Grand Total, ALL PLU or Individual PLU reports.
(To go back to the X Report Main Menu press the C key. To exit the ACCOUNT mode press the
C key twice.)
$#
PRT/*
Report : non PLU
09.02.04
17:11:19 / 09.02.04 17:21:32
Weight
Price
Q’ty
2.060
39.48
8
4) Press the key twice and the display will show “ rPt nonPLU”.$ º
To take the ALL PLU Sales Report,
There are four types of Z Sales Reports: Grand Total, ALL PLU’s, Non-PLU and ALL.
Each of the reports prints on a label and contains the time and date of the last reset report
(Z report), the current time and date and other sales data such as total weight, total sales and
total quantity information. After the label is issued the sales total information in memory is
reset back to zero.
You can use the key or key to select Grand Total, ALL PLU, Non-PLU or ALL reports.#$
5.3 Z Report (Read and Reset)
Note: Any Reset Report performed will effect the sales total memory of the other types of Reports.
For example, if a Grand Total Reset is performed and then you perform a Non-PLU Reset the label
for the Non-PLU Reset will show all zeroes.
To Next Page
Loading...
