6 Programming
59
If you want to use the discount/FSP for all PLUs, you should set ‘Y’ on the ‘Global Discount Use?’.
On the ‘Discount/FSP Priority, there are three options for using Discount/FSP.
They are the ‘INDEX’, ‘GLOBAL’, and ‘PLU’. If you select 6 for ‘PLU, INDEX’, ‘Sales Price’ on PLU data will
operate at first, and the ‘Discount/FSP’ on PLU data will at second.
You can use the FSP label format only for the PLUs that already have the FSP data.
If you want to print only discounted total price, select 0. If you want to print both the unit and total
Price, select 1.
6.6 Network Settings (optional)
The LP-II can be connected to a network either using a PC or one scale as the master. The network can
be hard-wired using an RS-232C or CAT-5 Ethernet cable. In addition, scales with an optional wireless
bridge built in can be connected using a router connected to a PC. To set this up consult the
networking manual
To Next Page
Loading...
