CAS LP1000N series - Page 39

40
NOTE : If there is no Head on the label format it is not printed even though you set it to “1” in label mask.
9) The display shows “LAbEL EntEr”. If you want to program label barcode press “4” key.
If you want to go to SET menu, press C key.
4) Label barcode
How to program the label barcode
1) To go to PROGRAM mode, press 1 by using numeric keys and MODE key.
2) Press v key five times.
3) The WEIGHT display shows “SEt”.
4) Press PRT/* key and the display shows “SEt EntEr”.