12
■
Key
Toggles the display between gross weight weight. and net weight.
If tare weight is saved, tare plus item's weight is gross
weight and only item's weight is net weight. Used to go to the “SET” mode.
■ Key (Weighed tare entry)
Used to weigh an item by using the container.
When this key is pressed, the scale stores current weight as the tare weight.
If you press
key in unload condition, tare weight is released.
Used to enter the “CAL” mode.
■ Key (Except NT-501A)
Used to see the high limit on the display, or change the high limit.
■ Key (Except NT-501A)
Used to see the low limit on the display, or change the low limit.
■ Key (Except NT-501A)
By pressing the
key and then or key, high fall limit or low fall limit is shown on
the display
■ Key
Manual Print Key. Designated printing form is printed.
Set print format in SET mode. (See F31 at page 32)
■ or Key
Key Model Description
NT-501A
Used to weigh live animals or an unstable items.
(Used as HOLD key)
NT-502A
NT-505A
F13 - 0 : Used as START key in packer mode.
F13 - 1 : Used to weigh live animals or an unstable item.
To Next Page
Loading...
