40
External input/output function④
F40 (Except NT-501A)
FUNCTION : Relay mode
VF DISPLAY SUB DISPLAY DESCRIPTION
0 Limit Mode
1 Checker Mode
2 Limit Type Checker Mode
3 Packer Mode
Set value
(0 ~ 4)
4
F40 rELAY
Relay is not used
<Limit Mode>
Note 1. When the scale is stable over the high limit, Final relay is ON.
Note 2. When low fall limit and high fall limit are set,
Low limit relay is ON (Weight = Low limit - Low fall limit).
High limit relay is ON (Weight = High limit - High fall limit).
Note 3. Zero relay is ON depending on the set of F43 (see page 38.)
To Next Page
Loading...
