46
12. Weighing Mode
(1) Zero Compensation
VF Display and use key Platform Description
Step 1
Empty
Small variations in the scale’s
zero
Step 2
☞
Step 3
Empty
Remove small variations in
the scale’s zero.
Note 1. Set zero range to ±2% or ±10% of maximum capacity in F10. (See page 30.)
Note 2. Set the conditions of zero in F11. (See page 30.)
(2) Net/Gross weight.
VF Display and use key Platform Description
Step 1
Container
And item
An item weight: 13.00 kg
Tare weight : 5.00 kg
Net weight is shown on the
display.
Step 2
☞ Press the
key.
Step 3
Container
And item
Gross weight is shown on the
display now.
Step 4
☞ Press the
key.
Step 5
Container
And item
Net weight is on the display now.
Note. NET lamp is on when net weight is shown on the display.
NET lamp is off when gross weight is shown on the display.
Press
key when the platform is empty.
Tare should be greater than the zero range of F10 in SET mode.
To Next Page
Loading...
