CAS RW-2601P Series - Test Mode Details; Entering and Navigating Test Mode

11
5. Test Mode
(1) How to enter
Press the "ON/OFF" key while pressing the key, and TEST menu starts.
(2) Available keys
Key : Change the set value. Used to increase the set value + 1.
Key : Change the digit of the set value. Used to increase the set value ×10.
Key : Move to the next menu.
(3) Test Menu(TEST 1 - TEST 5)
Test 1 : Key Test
Test 2 : LCD Display Test
Test 3 : Load Cell Test and A/D conversion test
Test 4 : Serial Interface / Printer Test(RS-232)
TEST 1
FUNCTION : Key test
Key Display Description
ENTER key :
Move to the next
menu.
Other key :
Perform test.
tESt 1
Key number
ex)In case of Zero key
1
TEST 1 condition.
Press the key to be test and the
No of key mode should be identify
with code of key.
If you press Enter key, it will be moved to
test 2.