CAS RW-2601P Series - Mode Entry Procedures

10

PRINT Key : Used to print the current weight.

TURCK No. Key : Used to input the number plate of vehicle which is used to weigh.
Only you can input number within five digits.
 PRINT Key : Used to store current condition and exit in CALIBRATION, TEST, SET mode.

P/F 1 Key : Used to display the weight which is connected to Platform 1.
 P/F 2 Key : Used to display the weight which is connected to Platform 2.
 P/F 3 Key : Used to display the weight which is connected to Platform 3.
 P/F 4 Key : Used to display the weight which is connected to Platform 4.
 P/F 5 Key : Used to display the weight which is connected to Platform 5.
 P/F 6 Key : Used to display the weight which is connected to Platform 6.
(3) How to enter TEST mode
Turn on the Power while pressing the key, and TEST mode starts.
(4) How to enter SET mode
Turn on the Power while pressing the key, and SET mode starts.
(5) How to enter CAL mode
Turn on the Power while pressing the key and press key, and CAL mode starts.