CAS WEIGHING SOLUTION NT-200 Series - Page 35

36
A/D CONVERTING SPEED(NT-200)
KEY FUNCTION DISPLAY VAL. DESCRIPTION
Select 1 ~ 9 05 05: 5times / sec
∫ ∫
ENTER
Save &
Go to F04
F11
60 60: 60 times / sec
UNIT Save & Exit Save & go to Normal Mode
A/D CONVERTING SPEED(NT-201)
KEY FUNCTION DISPLAY VAL. DESCRIPTION
Select 1 ~ 9 05 05: Average value of 5times.
∫ ∫
ENTER
Save &
Go to F04
F11
90 90: Average value of 90 times
UNIT Save & Exit Save & go to Normal Mode
If you try calibration, you should check F11 value 01.(NT-201 only)
 DEVICE Mode
Menu Description Menu Description
D01 Device ID D08 Automatic print
D02 COM1(RS-232) use D09 Line feed
D03 COM1 transmission method D10 Select print format
D04 COM1/2 Baud rate D11 Select date print format
D05 COM2 (RS-422) use D12 Select Product ID print
D06 COM2 transmission method D13 Select user’s message print
D07 Printer type D14 Set the current clock
DEVICE ID
KEY FUNCTION DISPLAY VAL. DESCRIPTION
Increase or
decrease
set value
d01
00
~
99
01: ID=0, 99: ID=99
If you use a system, you can iden-
tify each indicator by this device ID
If you set it to 00, there is no trans-
mission response cause 00 means
that is no device
UNIT Save & Exit Save & go to Normal Mode