CAS WEIGHING SOLUTION NT-200 Series - Page 37

3
8
COM2 (RS-422) USE
KEY FUNCTION DISPLAY VAL. DESCRIPTION
0 Do not use COM2
Select 0 ~ 3
1 CAS Protocol (22 bytes)
2
Limit Protocol (22 bytes)
ENTER
Save &
Go to d06
d05
3 Printer Mode
UNIT Save & Exit Save & go to Normal Mode
COM2 TRANSMISSION METHOD
KEY FUNCTION DISPLAY VAL. DESCRIPTION
0 No data output
Select 0 ~ 3
1
Transmit in stable & unstable
condition
2 Transmit only in stable condition
ENTER
Save &
Go to d07
d06
3 Command mode
UNIT Save & Exit Save & go to Normal Mode
Ref) Command mode can’t apply com1, com2 at once.
PRINTER TYPE
KEY FUNCTION DISPLAY VAL. DESCRIPTION
Select 0 ~ 2 0 Do not use
1 DLP (Label printer)
ENTER
Save &
Go to d08
d07
2 DEP (Roll printer)
UNIT Save & Exit Save & go to Normal Mode