Website:www.casainc.com
Contact Phone Number:888-257-3857
Service Contact:service@casainc.com
1 Remove the rubber washer,
.
metal washer and locking nut
from the faucet. Install faucet
through center hole
2.Re-install the rubber washer
followed by the matal washer
and lock-nut.Hand tighten
then tighten further using
a screw driverto tighten
lock-nut screws
4.Feed the black spray hose
back down through the spout
and faucet body and through
the hole in the sink. Then attach
the bottom of control box to
the black spray hose.
3.Attach the top control box to
the shortest braided line
coming from the faucet body.
PULL-DOWN WAVE SENSOR KITCHEN FAUCET
Need help?
General
To Next Page