5. Touch START pad.
NOTE:
·
Touch TIME and then touch CLEAR to cancel TIME during timing process.
SETTING COOKING TIMES AND POWER LEVELS
A. One-stage Cooking
1. Touch TIME pad.
2. Use the number pads to set a cooking time. You can set a cooking time from one second to 99
minutes and 99 seconds. If you are setting a time greater than one minute, you must enter
numbers for both minutes and seconds. For example, to set 20 minutes, enter 2,0,0,0.
3. If you want to set a power level other than 100% power, touch POWER, then use the number
pads to enter the power level. You can set the power level from 1 to 9.
4. Touch START to start cooking.
USE THESE SINGLE DIGIT TO
REPRESENT POWER LEVELS
Number pad % of Power
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1
10%
B. Two-stage Cooking
Some recipes require different stages of cooking at different temperatures.
1. SET STAGE 1:
Follow steps 1 and 2 in “One-stage Cooking”.
DO NOT TOUCH START PAD.
2. SET STAGE 2:
Touch MEMORY pad then enter proper cooking time and (lower) power level. (Most 2-stage
recipes use lower power for second stage.)
3. Touch START pad.
NOTE:
·
The respective lights will come on to indicate which stage the oven is operating in. After total
time has elapsed, 3 beeps sound. After a cooking or defrosting program has completed, the
To Next Page
Loading...
