1001 - 4
SPX 4260 Troubleshooting Manual
Issued 2-03 Printed in U.S.A. Safety
SAFETY
To prevent injury, always follow the Warning, Caution and Danger notes in this section and throughout the
manual.
Put the “Do Not Operate” tag shown below on the key for the key switch when servicing or repairing the
machine. Tags are available from your service parts supplier.
Before servicing a machine, park the machine on hard level ground. Turn off the engine, apply the parking
brake and remove the key from the key switch. Put blocks in front of and behind either the front or rear wheels.
WARNING: This safety alert symbol indicates important safety messages in this manual. When you
see this symbol, carefully read the message that follows and be alert to the possibility of personal
injury or death.
WARNING: Read the Operators Manual to familiarize yourself with the correct control
functions.
WARNING: Operate the machine and equipment controls from the seat position only. Any
other method could result in serious injury.
WARNING: This is a one person machine, no riders allowed.
WARNING: Before starting engine, study Operators Manual safety messages. Read all
safety signs on machine. Clear the area of other persons. Learn and practice safe use of
controls before operating. It is your responsibility to understand and follow manufacturers
instructions on machine operation, service, and to observe pertinent laws and regulations.
Operator and Parts Manuals may be obtained from your equipment dealer.
WARNING: If you wear clothing that is too loose or do not use the correct safety equipment
for your job, you can be injured. Always wear clothing that will not catch on objects. Extra
safety equipment that can be required includes hard hat, safety shoes, ear protection, eye or
face protection, heavy gloves and reflective clothing.
DO NOT
OPERATE
Reason
Signed by
DO NOT REMOVE
THIS TAB!
See Other Side
Case Part No.
Printed in
U.S.A.
To Next Page
Loading...
