CashTester CT 332 SD - Unit Design and Operation; 1.4 Unit Design; 2.1 Operation

Cashtester CT 332 SD
- 3 -
1.4 Unit design
1 Indicator output direction genuine notes
2 Indicator output direction genuine notes
3 Power ON/OFF key
4 DIR-CLEAR key
5 Power supply/warning indicator
6 Number of checked notes
7 Currency indicator for Euro
8 Currency indicator for second currency
9 Value of checked note(s)
10 REP-DEN/ADD key
11 Power adapter connection
12 USB upload port
13 Rear exit
Settings and functions
2.1 Operation
To turn the CT 332 SD on, connect the adapter, press the "ON/OFF" key and hold it for about 2 seconds.
The ON/OFF indicator will lighten up and a self-test will start. The detector is ready for use when ‘0’
appears in both displays.
Currency
This Euro detector contains software for max. 2 currencies and it automatically detects the banknote.
At the moment a note is inserted, the motor will start running and the CT 332 SD checks the note. Always
insert the banknote in a right angle. The Euro and most other currencies can be inserted in all 4 length
way directions.
Please ask you distributor for more information about currencies other than Euro.