English
Playing with Different Tones
E-11
Changing the Octaves of the duet
keyboards
You can change the ranges of the left and right
keyboards in octave units from their initial default
settings. This comes in handy, for example, if the initial
default range is not enough when one person is
playing the left hand part and another person is
playing the right hand part.
1.
While holding down the FUNCTION and
METRONOME buttons, press the keyboard
C key that you want located at C4 (middle C)
of the left keyboard.
• This will sound the note assigned to C4 and change
the octave of the left keyboard.
Example: Press the keyboard key of the leftmost C (C4)
will assign the range shown below.
2.
While holding down the FUNCTION and
METRONOME buttons, press the keyboard
C key that you want located at C4 (middle C)
of the right keyboard.
• This will sound the note assigned to C4 and change
the octave of the right keyboard.
NOTE
• You can return the keyboards to their initial default
ranges by exiting and then re-entering the Duet
Mode.
C4 C5 C6 C7 C3 C4 C5 C6
Left keyboard Right keyboard
(Pressed key)
1 octave higher than initial
setting
Unchanged
AP450_e.book 11 ページ ２０１２年６月２０日 水曜日 午前１１時１１分
To Next Page
Loading...
Need help?
General