Controlling the Sound of a Performance
EN-102
5.
Press UPPER1, UPPER2, or LOWER to select the parts to which you want to
apply the effect. This causes the selected part indicators (“U1”, “U2”, “L”) to
appear in the lower right of the display.
• Effects can be applied to up to two parts at the same time.
6.
Press UPPER1, UPPER2, or LOWER to select the part for which you want to
disable application of the effect. This causes the selected part indicator (“U1”,
“U2”, “L”) to disappear from the lower right of the display.
7.
To exit the setting operation, press BACK.
• For information about parts, see “Layering and Splitting Tones” (page EN-123).
To Next Page
Loading...
