Playing a Built-in Song
EN-16
You can use the procedure below to change the tempo
(speed) and slow down playback to practice difficult
passages, etc.
1.
While the [SONG] screen is displayed, select
the song whose tempo you want to change and
then press TEMPO.
This displays the [TEMPO] screen.
2.
Rotate the dial to change the tempo setting.
• You can specify a tempo value in the range of 20 to
255.
• You can also use the – and + buttons to change the
setting. Press the – button to make the tempo slower
or the + button to make it faster. Holding down either
button scrolls the setting value.
• To return to the recommended setting for the current
song, press – and + at the same time.
• Changing the song number will also return the song to
its recommended tempo.
• To go back to the previous screen, press the EXIT
button.
Use the procedure below to adjust the balance between the
volume levels of song play and what you play on the
keyboard.
1.
Press FUNCTION.
This displays the [FUNCTION] screen.
2.
Use the U and I buttons to select “Song
Volume”.
• To go back to the previous screen, press the EXIT
button.
3.
Rotate the dial to adjust the volume level.
• You can specify a volume value from 0 to 127.
• After you rotate the dial once to select an option, you
also will be able to change the selection using the –
and + buttons.
• To return the setting to its initial default, press the –
and + buttons at the same time.
• To go back to the previous screen, press the BACK
button.
4.
Press FUNCTION to exit the setting screen.
Changing a Song’s Tempo (Speed) Adjusting the Song Volume Level
To Next Page
Loading...
