Playing a Built-in Song
EN-80
3.
Press SETTING.
This displays the setting screen.
4.
Use U and I to select “Song Volume”.
5.
Rotate the dial or use – and + to change the SONG volume level.
• You can specify a volume value from 0 to 127.
• To return the setting to its initial default, press – and + at the same time.
6.
To exit the setting operation, press EXIT.
1.
While a song is playing, press TONE.
The selected tone number and instrument name appears on the display.
2.
Rotate the dial to select a tone.
• For tone information, see the “Tone List” (page EN-181).
• After you rotate the dial once to select an option, you can change the selection further using –
and +.
• To return to the first tone in the Tone List, press – and + at the same time.
• To go back to the previous screen, press BACK.
Changing the Keyboard Tone While a Song Playing
To Next Page
Loading...
