Getting Ready to Play
EN-13
To use a pedal, connect it to the PEDAL jack on the back of the Digital Keyboard.
• A pedal unit does not come with this Digital Keyboard.
• Use the optional (SP-3, SP-20) pedal.
Connect a commercially available dynamic microphone to the MIC IN jack.
• Before connecting, rotate the MIC VOLUME knob to its lowest setting.
• Before connecting a microphone, make sure that the Digital Keyboard and microphone are
turned off.
• It takes a few seconds for the microphone to become enabled after you turn on the Digital
Keyboard.
Connecting a Pedal (Option)
Connecting a Commercially Available Microphone
Pedal (option)
PEDAL jack (6.3mm standard jack)
MIC VOLUME knob
MIC IN jack (6.3mm standard jack)
To Next Page
Loading...
