Casio DH-100 - Making Music Basics; Initialized Settings

The Basics: How to Make Music on the DH-100
1. Supply power to the DH-100.
2. Turn the DH-100 power switch ON.
An indicator above the switch lights
3. Select the “Breath Mode” you want to use.
e To play the horn by actually blowing through
the mouthpiece, set the Breath Mode switch to
the ON position.
• To play the horn without blowing, set the Breath
Mode switch to the OFF position. (See page 8.)
4. Adjust to an appropriate volume level with the volume
control.
5. Select a preset tone. .
When DH-100 power is turned ON, the SAXO-
PHONE tone is selected automatically. To choose
other tones, simply press the Tone Selector (see
page 9).
6. Play the DH-100 using either standard recorder finger-
ing or Casio's original finger pattern (see page 11).
Initialized Settings
When DH-100 power is turned ON, it is set up to operate a
certain way. The settings that are selected automatically are
known as initialized settings. These respective settings are
shown in the chart below.
Initialized Settings
FINGERING PATTERN
AUTO POWER OFF FUNCTION
The Basics 7