Casio FX-300ES PLUS

fx-300ES PLUS 2nd Edition Quick Start Guide
5
Enterthedatapointsandndthelinearregression
formula.
(2,5) (3,8) (7,20)
Entering Data:
1. From the initial Stat screen, press 2(A+BX) for a
linear regression.
2. Enter the x-values into the table by pressing
2=3=7=.
3. Use the arrow keys to move to the top of the y-column
and enter the y-values by pressing
5=8=20=.
STAT MODE
To start a statistical calculation, press w2 to enter STAT mode and use the screen that appears
to select the type of calculation you want to perform.
Note: When you want to change the calculation type after entering STAT mode, press q1
(STAT/DIST)1(Type) to display the calculation type selection screen.