— 7 —
7.
Press the
BB
BB
B button to
increase the ten’s digit
setting by one.
• You can set the year within
the range of 2000 to 2099.
.
Press the
AA
AA
A button.
• The second hand will move to
the one’s digit of the year
setting.
1
2
3
9
8
7
4
6
5
0
9.
Press the
BB
BB
B button to
increase the one’s digit
setting by one.
10.
Press the
AA
AA
A button to
return to the Timekeeping
Mode.
• This will cause the hands to
move to the current time, and
resume normal movement.
• The watch automatically makes adjustments for leap years and
month lengths. The date will change automatically when the
current time reaches midnight. The date change at the end of the
month may take more time than normal.
Year (one
’
s di
it)
Power Saving puts the watch into a sleep state, which will cause the second hand to stop moving whenever the watch is left in the dark.
• Note that hand movement may stop if the watch is blocked from light by your sleeve.
Power Saving
How the sleep state works
Sleep Level 1
The second hand stops whenever the watch is left in the dark for
about one hour between the hours of 10:00 p.m. and 6:00 a.m.
• The hour and minute hand, and the date continue to operate
normally.
• The alarm operates normally.
Sleep Level 2
If the watch is left in the dark for an additional six or seven days,
the hour and minute hands, and the date indicator also stop.
• Auto time calibration is not performed.
• The alarm does not sound.
• Timekeeping continues internally even when the hands are
stopped.
To recover from the sleep state
Move the watch to a brightly lit location, press any button, or raise
the watch to your eyes for viewing (see “To illuminate the face with
the auto light switch”). The hands will move to the current time
setting and resume timekeeping from there.
■
■
To Next Page
Loading...
Need help?
General
