- 3 -
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is 23
hours, 59 minutes, 59 seconds.
To measure elapsed time
1. Press to start the stopwatch.
2. Press to stop the stopwatch.
You can resume the measurement operation by press-
ing again.
3. Press to clear the stopwatch to all zeros.
For the first 60 minutes, the display shows minutes,
seconds, and 1/100 second. After 60 minutes, the dis-
play format changes to show hours, minutes, and sec-
onds.
To record split times
1.Press to start the stopwatch.
2.Press to display the timing up to that point. Stopwatch timing continues internally.
3.Press to clear the split time and to continue time measurement on the display.
You can repeat steps 2 and 3 as many times as you want.
4.Press to stop the time measurement.
5.Press to clear the stopwatch to all zeros.
To time first and second place finishes
1.Press to start the stopwatch.
2.Press when the first finisher crosses the line, and record the time.
3.Press when the second finisher crosses the line.
4.Press to display the finishing time of the second finisher.
5.Press again to clear the stopwatch to all zeros.
Current time
Seconds
Mode indicator
1/100 second
Minutes
To Previous Page
Loading...
Need help?
General
